|
Technical Specifications |
| Spring Unit |
Bonnell Springs |
| Spring Count |
- 9x25 ™ =225 Coil-Single20Qx700cms
- 12x25 = 300 Coil-Twin 200xl20cms
- 15x25 ~ 375 Coil-Queen 200x160cms
- 16x25 = 400 Coil-King 200x180cms
- 18x25 = 450 Coil- Super Kin
- 2.4 mm Hi - Carbon Steel Spring Wire ISO 9002
|
| Wire Gauge |
2.4 mm Hi - Carbon Steel Spring Wire ISO 9002 |
| Design |
Bonnell Spring Diameter 80 mm 10cms and 4 turns |
| Heat Treatment |
The spring unit is heat-tempered anti-rust proof for stress relief. |
| Tensile Strength |
Spring Wire 165-185 kg/m2
Hellical Wire155-175 kg/m2 |
| Primary Insulator |
Full size Heavy Duty Plastic Net to avoid pocketing is fixed on both sides of the spring unit |
| Secondary Insulator |
12 mm 125 density rubberized coir sheet with Hessian cloth backing is fixed on both sides of the spring unit |
| Upholstery Layer |
850 gsm bonded cotton felt is fixed on both sides of the spring unit enhancing the firmness and comfort of the mattress |
| Mattress Cover |
Damask / Knit Fabric with multi needle quilt of 0.5PU Foam +100gsm Polyester Fiber fill with 18 g/rr^Remmy as backing. |
| Border / Stabilizer |
65 mm High Density PU Foam firm walls support throughout the perimeter of the mattress to provide the fundamental support and stability to the mattress |
| Other Specification |
|
High Carbon Steel-Bonnel
Springs of 2.4 mm with
4 turns.
Unbending Perimetrical
Wall
High Density Insulation
(Cotton Felt/Rubberised
Coir Pad)
High Density PU
Foam + Siliconised
Polyster Fibre
Flame retardant
stripe fabric
imported from
Belgium with multi needle quilt. |
